---
title: "How to Choose a Residential Proxy Provider | Proxonym"
description: "Ten checks before you buy residential proxies: real price per GB, traffic expiry, subscriptions, coverage, sessions, limits, sourcing, payment and refunds."
url: https://proxonym.com/blog/choose-residential-proxy-provider
updated: 2026-10-01T21:31:28+00:00
---

Guides · October 1, 2026 · 5 min read

# How to Choose a Residential Proxy Provider: 10 Checks

Headline prices hide most of the cost. Ten checks that tell residential proxy providers apart, a table of red flags and a simple way to test on your own targets.

By the Proxonym team

Residential proxy providers look alike on their home pages: millions of IPs, hundreds of countries, a low price per GB. The differences that decide what you will pay and whether your jobs succeed sit lower down, in validity rules, renewal terms, session limits and refund policies.

This guide gives ten checks that separate providers, the red flags to watch for, and a short test plan you can run before committing a budget.

## Start with your own numbers

Before comparing anyone, write down three figures: how many GB you expect to use per month, the countries and cities you need, and the longest session one job requires. A provider that looks cheap at 10 TB can be expensive at 50 GB, and a pool of 50 million IPs means little if the city you target has a few hundred.

If you are still deciding between proxy types, [residential vs datacenter proxies](https://proxonym.com/blog/residential-vs-datacenter-proxies) covers when residential IPs are worth their price.

## The ten checks

### 1. Price per GB at your volume

Headline prices usually apply to the largest pack. Find the tier that matches your monthly usage and divide its price by its GB. That number, not the one in the banner, is your cost. Check also whether targeting, sticky sessions or a specific country add a surcharge.

### 2. How long traffic stays valid

Many packs expire after 30 days, so unused GB are lost. Look for longer validity windows or packs that never expire if your usage is irregular. A slightly higher price per GB on a pack that keeps its traffic often costs less in the end than a low price on traffic you throw away.

### 3. Subscription or pay as you go

Monthly subscriptions renew automatically and often reset unused traffic. One-time packs cost what they say and renew only when you decide.

### 4. Coverage where you need it

Ask for the IP count in your target countries and whether state, city and ASN targeting cost extra. Country pages with live counts are a good sign. Pools change during the day, so a count that is updated regularly matters more than a big round number.

### 5. Session control

You need a new IP per request for broad crawls and a sticky IP for multi-step flows. Check the maximum sticky duration and how sessions are requested.

### 6. Concurrency and rate limits

Some plans cap parallel connections or threads. A cap you hit every day turns a cheap plan into a slow one. Ask too how the provider handles bursts: a polite rate limit with a clear error code is easier to work with than silent timeouts.

### 7. Protocols and tooling

HTTP, HTTPS and SOCKS5 should all work with the same credentials, with setup guides for the libraries and browsers you use.

### 8. How the IPs are sourced

Residential IPs come from real devices. Ask how peers consent, whether they can leave at any time and which targets are blocked. A provider that cannot answer is a risk for you too. Consent also protects your own jobs: networks built on informed peers lose fewer IPs without warning.

### 9. How you can pay

Cards, wire transfers and crypto suit different teams. If you pay in crypto, check which coins and networks are accepted, how fast a top-up is credited and whether larger top-ups earn bonus credit.

### 10. Refunds and small packs

Every target behaves differently, so you want to test cheaply. Look for a small starting pack and a clear refund window for plans you barely used. Ask whether a refund returns to your balance or to your payment method, and how long it takes.

## Red flags at a glance

| Check | Ask the provider | Red flag |
| --- | --- | --- |
| Price per GB | What do I pay per GB at my monthly volume? | Only the largest tier is published |
| Expiry | When does unused traffic expire? | Traffic resets every month with no option to keep it |
| Renewal | Does the plan renew on its own? | Automatic renewal you must remember to cancel |
| Coverage | How many IPs in my cities? | Country totals only, no city or ASN counts |
| Sessions | How long can one IP stay sticky? | No sticky sessions, or a few minutes at most |
| Limits | How many parallel connections? | Thread caps on entry plans |
| Sourcing | How do peers opt in and out? | No public sourcing policy |
| Refunds | Can I get a refund after a short test? | No refund policy published |

## How to test before you commit

Buy the smallest pack and run your real job, not a demo URL. Send a few hundred requests to your actual targets in the countries you need, then measure the share of complete pages, the share of challenges and errors, and the median response time. Run the same batch with sticky sessions if your flow has several steps. Compare providers on cost per successful page, not per GB: a cheaper GB that fails twice as often costs more.

A simple example shows why. Say provider A charges $3 per GB and 95% of your pages come back complete, while provider B charges $2 per GB and only 60% do. If a page weighs 1 MB, each complete page costs about $0.0032 with A and $0.0033 with B, before you count the time spent retrying. The cheaper GB is not the cheaper result.

Keep the test honest: use the same targets, the same hours and the same request rate for every provider, and write down the error codes you get. A burst of `403` answers points to blocked IPs, while timeouts point to slow peers or overloaded gateways.

## Where Proxonym stands on each check

Every tier is published on the [pricing page](https://proxonym.com/pricing): residential traffic costs from $0.74/GB at 10 TB, and the smallest pack is $9.95 for 5 GB. Packs are one-time purchases valid 30, 60 or 90 days, or with no expiry, and nothing renews automatically. The [price per GB with the top-up bonus](https://proxonym.com/cheap-residential-proxies) shows how larger top-ups lower the effective rate.

The [residential network](https://proxonym.com/residential-proxies) counts 55M+ IPs in 195+ countries with state, city and ASN targeting at no extra cost, sticky sessions up to 120 minutes and no concurrency cap. Peers opt in and can leave at any time, as described in our [sourcing policy](https://proxonym.com/ethics). Payment is in Bitcoin, Ethereum, Monero, USDT on TRON or Solana, and plans with minimal usage can be refunded within 3 days.

## Key takeaways

- Compare the price per GB at your own monthly volume, not the headline price.
- Check expiry, renewal and refund rules: they decide what unused traffic and a failed test cost you.
- Verify coverage, session length and concurrency against your real jobs.
- Ask how IPs are sourced, then test on your own targets and compare cost per successful page.

Put it into practice

- [Residential proxies](https://proxonym.com/residential-proxies): Best for scraping well-protected sites. from **$0.74**/GB
- [Unlimited residential](https://proxonym.com/unlimited-residential-proxies): Best for heavy crawls and AI training data. from **$33.25**/day
- [Mobile proxies](https://proxonym.com/mobile-proxies): Best for social media and mobile apps. from **$0.74**/GB

Step-by-step setup

- [cURL proxy setup](https://proxonym.com/integrations/curl)
- [Python Requests proxy setup](https://proxonym.com/integrations/python-requests)
- [Scrapy proxy setup](https://proxonym.com/integrations/scrapy)

Try it on your own target

Self-serve plans, crypto accepted, live in minutes. Plans never renew on their own.

## Keep reading

[All articles](https://proxonym.com/blog)

- [Proxies for AI Agents: Reliable Web Access for LLM Apps](https://proxonym.com/blog/proxies-for-ai-agents): AI agents fail when the web blocks them. Which tool fits each job, from search grounding to browsing agents, with Playwright code and the rules that keep agents welcome. (Guides, 5 min read)
- [Mobile vs Residential Proxies: Which One Do You Need?](https://proxonym.com/blog/mobile-vs-residential-proxies): Carrier IPs and home IPs both look like real users, but they behave differently. A side-by-side comparison of trust, rotation, coverage, speed and cost, with a decision guide. (Guides, 5 min read)
- [Web Scraping Without Getting Blocked: 12 Practical Techniques](https://proxonym.com/blog/web-scraping-without-getting-blocked): Twelve techniques that keep scrapers running: respect the rules, pace requests, rotate IPs sensibly, stay consistent, back off on errors, cache and monitor success rates. (Guides, 5 min read)